Pneumatic
Solutions
World's leading pneumatic manufacturer SMC, FESTO & CKD. Complete range of FRL units, solenoid valves, air cylinders, vacuum equipment, grippers & more — for every automation need.
World's leading pneumatic manufacturer SMC, FESTO & CKD. Complete range of FRL units, solenoid valves, air cylinders, vacuum equipment, grippers & more — for every automation need.
AC Series modular Filter-Regulator-Lubricator units for complete compressed air preparation. Available in 8 body sizes with combinable modules — filter, regulator, lubricator, mist separator and more.
Modular design allows any combination of Filter, Regulator, and Lubricator to be assembled for optimised point-of-use air preparation.
| Parameter | Specification | Notes |
|---|---|---|
| Series | AC10 – AC60 / AC20-D – AC40-D | Modular system |
| Max. Set Pressure | 0.7 MPa (AC) / 0.86 MPa (AC-D) | 125 psi for AC-D |
| Operating Temperature | 0 to 60°C | –5 to 50°C with digital switch |
| Filtration Rating | 5 µm (standard element) | ISO 8573-4 / ISO 12500-3 |
| Port Sizes | M5 to G1 | Series dependent |
| Bowl Material | Polycarbonate (with guard) | Guard: PC material |
| Fluid | Compressed air (non-lubricated) | — |
| Drain | Manual / Semi-auto / Auto drain | N.O. or N.C. type |
| Options | Pressure switch, check valve, spacer, bracket | Modular add-on |
| Standard | ISO 8573-4, ISO 12500-3 | — |
Build your own FRL assembly — filter only, regulator only, or any F+R+L combination. Spacers allow T-branch connections.
| Body Size | Port Size | Max Flow (L/min ANR) |
|---|---|---|
| AC10 | M5 | ~100 |
| AC20 | 1/8" | ~300 |
| AC25 | 1/8"–1/4" | ~500 |
| AC30 | 1/4" | ~800 |
| AC40 | 3/8"–1/2" | ~1500 |
| AC50 | 3/4" | ~2500 |
| AC60 | 1" | ~4000 |
FRL units are installed at the inlet of every pneumatic circuit to ensure clean, dry, regulated air supply to all downstream components.
Point-of-use FRL at each robot axis for optimised pressure and air quality.
Clean air for spindle air seal, tool change, and clamping circuits.
Regulated supply to high-cycle pneumatic actuators and valve banks.
Clean/oil-free FRL variants for contamination-sensitive processes.
SY Series 5-port pilot solenoid directional control valves with up to 80% higher flow, H-NBR ozone-resistant seals, and manifold mounting capability. Plus VXZ/VNA process valves for liquid and gas control.
Redesigned SY series with up to 80% increased flow over predecessors. Built-in pilot strainer, H-NBR seals, and side/top/bottom port options for flexible machine integration.
| Parameter | SY3000 | SY5000 | SY7000 |
|---|---|---|---|
| Valve Type | 5-port pilot solenoid | 5-port pilot solenoid | 5-port pilot solenoid |
| Operating Pressure (int. pilot) | 0.1 – 0.7 MPa | 0.1 – 0.7 MPa | 0.1 – 0.7 MPa |
| Ext. Pilot Range | –100 kPa to 0.7 MPa | –100 kPa to 0.7 MPa | –100 kPa to 0.7 MPa |
| Eff. Area — Body ported (Cv) | 4.14 mm² (0.23) | 10.6 mm² (0.59) | 10.6 mm² (0.59) |
| Eff. Area — Base mounted (Cv) | 5.4 mm² (0.30) | 12.6 mm² (0.70) | 12.6 mm² (0.70) |
| Coil Voltage (DC) | 3,5,6,12,24 VDC | 12, 24 VDC | 12, 24 VDC |
| Coil Voltage (AC) | 100,110,200,220 VAC | 100,200 VAC | 100,200 VAC |
| Response Time (0.5 MPa) | 15 ms or less | 16 ms or less | 32 ms or less |
| Seal Material | H-NBR | H-NBR | H-NBR |
Direct-operated solenoid valves for controlling flow of air, water, oil, and mild chemicals in process pipelines.
| Parameter | Specification |
|---|---|
| Series | VXZ / VXD / VNA / VNB / VNC |
| Valve Type | 2-way or 3-way, direct-operated solenoid |
| Orifice Size | ø1.0 to ø25 mm |
| Operating Pressure | 0 – 1.0 MPa |
| Fluids | Air, water, oil, mild chemicals |
| Body Material | Brass / Stainless steel |
| Seal Options | NBR, FKM (Viton), EPDM |
| Voltage | 12/24 VDC; 100/200 VAC |
| Port Connection | Rc 1/8 to Rc 1/2 |
| Electrical Entry | Grommet / DIN terminal / Conduit |
| Protection Class | IP65 |
| Operating Temp. | 0 – 60°C |
Valves serve every stage of machine automation — from high-speed cylinder control to liquid process management.
Manifold SY valves for multi-axis cylinder banks with fieldbus control.
Stainless VXZ process valves for water and chemical flow control.
High-speed valve banks for welding fixtures, clamping and transfer lines.
Low-power solenoid valves for diagnostics, dispensing and ventilators.
Pneumatic cylinders from ø6 mm compact to ø125 mm heavy-duty, plus CHQ compact hydraulic cylinders rated to 3.5 MPa nominal pressure. Double acting, single acting, and specialty variants available.
Lightweight compact cylinders in ø6, ø10, ø16 mm bore. Multiple mounting styles, auto switch capability, and rubber bumper or air cushion options.
| Parameter | Specification |
|---|---|
| Series | CJ2 / CDJ2 |
| Bore Sizes | ø6, ø10, ø16 mm |
| Standard Strokes (ø10) | 15, 30, 45, 60, 75, 100, 125, 150 mm |
| Standard Strokes (ø16) | 15 to 200 mm (8 steps) |
| Action | Double acting / Single acting (spring return or extend) |
| Rod Types | Single rod / Double rod / Non-rotating rod |
| Operating Pressure | 0.1 – 1.0 MPa |
| Fluid | Compressed air |
| Temperature Range | –10 to 70°C |
| Mounting Styles | Basic / Foot / Flange / Clevis / Double-side bossed |
| Cushion Options | Rubber bumper / Air cushion |
| Auto Switch | Rail mount (–A) / Band mount (–B) |
| Rod End Options | Knuckle joint, rod end cap (flat/round) |
Heavy-duty industrial cylinders for medium to large bore applications. Available in foot, flange, clevis and trunnion mounting configurations.
| Bore (mm) | Piston Area (mm²) | Force @ 0.5 MPa (N) | Force @ 1.0 MPa (N) |
|---|---|---|---|
| ø20 | 314 | 157 | 314 |
| ø32 | 804 | 402 | 804 |
| ø40 | 1,257 | 628 | 1,257 |
| ø50 | 1,963 | 981 | 1,963 |
| ø63 | 3,117 | 1,559 | 3,117 |
| ø80 | 5,027 | 2,513 | 5,027 |
| ø100 | 7,854 | 3,927 | 7,854 |
| ø125 | 12,272 | 6,136 | 12,272 |
Lightweight aluminum body hydraulic cylinders for applications requiring higher force than pneumatics. Rated to 3.5 MPa nominal pressure. Auto switch mounting available on CHDQ series.
| Bore (mm) | Force @ 1.0 MPa (N) | Force @ 2.0 MPa (N) | Force @ 3.5 MPa (N) |
|---|---|---|---|
| ø20 | 235 | 470 | 822 |
| ø32 | 603 | 1,206 | 2,110 |
| ø40 | 1,055 | 2,110 | 3,692 |
| ø50 | 1,649 | 3,298 | 5,771 |
| ø63 | 2,803 | 5,606 | 9,810 |
| ø80 | 4,535 | 9,070 | 15,872 |
| ø100 | 7,147 | 14,294 | 25,014 |
Cylinders cover every actuation need from miniature pick-and-place to heavy industrial clamping.
Compact CJ2 cylinders for high-cycle part transfer and positioning.
Hydraulic CHQ cylinders for high-force press and fixture clamping.
Standard bore cylinders on welding jigs, transfer lines, and body shops.
Stainless/washdown cylinders for hygienic food packaging environments.
CRB2 vane-type rotary actuators (up to 270°), MHZ2 parallel air grippers with integrated linear guide for high rigidity, and MHM magnetic grippers for metallic workpiece handling without vacuum.
Compact single and double vane rotary actuators for indexing, turning, and orientation tasks. Single vane up to 270°; double vane 90° or 100°.
| Parameter | Specification |
|---|---|
| Series | CRB2 / CDRB2 (with auto switch) |
| Bore Sizes | ø10, ø15, ø20, ø30, ø40 |
| Rotation (single vane) | Up to 270° |
| Rotation (double vane) | 90° or 100° (standardised) |
| Operating Pressure | 0.1 – 0.7 MPa |
| Fluid | Compressed air |
| Auto Switch | Compatible (CDRB2 series) |
| Mounting | Flange, foot, direct |
Standard parallel 2-finger gripper with integrated linear guide for high rigidity and accuracy. Dowel pin positioning prevents guide slippage. Mounting versatility on 3 sides in 5 configurations.
| Bore (mm) | Total Stroke (mm) | Open Force (N) | Close Force (N) |
|---|---|---|---|
| ø10 | 4 | 34 | 22 |
| ø16 | 6 | 58 | 38 |
| ø20 | 8 | 100 | 65 |
| ø25 | 10 | 160 | 105 |
| ø32 | 14 | 270 | 175 |
Permanent magnet gripper for metallic workpieces. Holds parts even when air supply is interrupted. Replaces vacuum cups on ferrous components.
| Parameter | Specification |
|---|---|
| Series | MHM |
| Working Principle | Permanent magnet (pneumatic release) |
| Holding Method | Magnetic — retains workpiece without air |
| Release Method | Pneumatic air actuation |
| Workpiece Type | Ferrous metallic parts |
| Auto Switch Mounting | 2 surfaces |
| Mounting Options | Body tapped, lateral, central |
| Advantage vs vacuum | No air consumption while holding; works with oily/uneven surfaces |
Grippers and rotary actuators serve every end-of-arm tooling requirement in modern robotic assembly.
MHZ2 grippers as end-of-arm tools on collaborative and industrial robots.
CRB2 rotary actuators for 90° / 180° part orientation on assembly lines.
MHM magnetic grippers for ferrous sheet metal blank transfer.
Compact grippers for PCB, component, and connector assembly.
ZH/ZU vacuum ejectors (venturi-type), ZPT suction cups in 0.8–200 mm diameter, ZQ compact multi-station, ZM high-volume — complete vacuum pick-and-place system components including vacuum filters, regulators and sensors.
| Model | Nozzle (mm) | Vacuum (kPa) | Suction (L/min) | Air Cons. (L/min) |
|---|---|---|---|---|
| ZH05 | 0.5 | −88 | 3.5 | 13 |
| ZH07 | 0.7 | −88 | 6.5 | 25 |
| ZH10 | 1.0 | −88 | 12 | 50 |
| ZH13 | 1.3 | −88 | 22 | 90 |
| Cup Shape | Best For | Material Options |
|---|---|---|
| Flat | Flat rigid surfaces | NBR, Silicone, FKM |
| Bellows | Uneven / curved surfaces | NBR, Silicone, Urethane |
| Deep | Concave parts, bottles | NBR, Silicone |
| Oval | Long narrow parts | NBR, Silicone |
| Oval Flat | Sheet panels | NBR, Mark-free |
Glass, steel and aluminium sheet lifting and transfer.
Corrugated box picking and palletising.
High vacuum wafer handling and inspection stages.
FDA-grade cups for bakery, fruit, and pouch handling.
AR general regulators, IR precision regulators (±0.5% F.S., up to 0.8 MPa), and VBA booster regulators that amplify line pressure 2× or 4× without electricity — for isolated high-force requirements.
Standard air pressure regulator for setting and maintaining downstream pressure. Available with optional relief function (AR-K series).
| Parameter | Specification |
|---|---|
| Series | AR10 – AR60 |
| Max. Set Pressure | 0.7 MPa |
| Max. Supply Pressure | 1.0 MPa |
| Set Pressure Range | 0.05 – 0.7 MPa |
| Port Sizes | M5, R1/8, R1/4, R3/8, R1/2 |
| Built-in Filter | 5 µm |
| Relief Function | Available (AR-K series) |
| Operating Temp. | 0 to 60°C |
| Options | Gauge, bracket, lock mechanism |
High-accuracy pressure regulation to ±0.5% F.S. with increased max set pressure to 0.8 MPa and 5× higher relief flow vs previous models.
| Parameter | Specification |
|---|---|
| Series | IR1000 / IR2000 / IR3000 |
| Max. Set Pressure | 0.8 MPa |
| Min. Supply Pressure | Set pressure + 0.05 MPa |
| Repeatability | ±0.5% F.S. |
| Hysteresis | ≤1% F.S. |
| Port Sizes | M5, R1/8, R1/4 |
| Operating Temp. | 0 to 60°C |
| Gauge Mounting | Front or rear (interchangeable) |
| Special Versions | High temp / Low temp / Stainless / Digital switch |
Air-only booster — no electricity required. Increases factory line pressure 2× (VBA10A) or 4× (VBA11A) at the machine level to serve isolated high-force requirements without raising plant-wide pressure.
| Parameter | VBA10A (2×) | VBA11A (4×) |
|---|---|---|
| Pressure Boost Ratio | 2× | 4× |
| Set Pressure Range | 0.4 – 1.4 MPa | 0.8 – 2.0 MPa |
| Max. Supply Pressure | 0.7 MPa | 0.5 MPa |
| Max. Output Pressure | 1.4 MPa | 2.0 MPa |
| Power Supply | Air only (no electricity) | Air only |
| Service Life | 50 million cycles+ | 50 million cycles+ |
| Silencer | Built-in (–15 dB) | Built-in |
| Mounting | Horizontal & vertical | Horizontal & vertical |
| Air Tank Options (VBAT) | 0.5 L / 1.0 L / 2.0 L / 3.8 L | |
Pressure control equipment ensures every pneumatic circuit receives the correct pressure for safe and efficient operation.
Booster regulators for intermittent high-force clamping from standard 0.7 MPa supply.
IR precision regulators maintain constant atomisation pressure for coating quality.
Precision regulators for stable, repeatable pressure in test rigs and instruments.
VBA booster + tank for short-cycle high-force press operations.
KQ2 one-touch fittings — metric and inch sizes, wide body styles, vacuum to 1.0 MPa pressure range. Special profile seal for reliable sealing. TU/TS polyurethane tubing, TRS/TRB specialty tubing, fluoropolymer TL/TH series.
| Type | Description | Tube OD (mm) |
|---|---|---|
| KQ2H | Straight male run | 4, 6, 8, 10, 12 |
| KQ2E | Female elbow | 4, 6, 8, 10, 12 |
| KQ2T | Male T-branch | 4, 6, 8, 10, 12 |
| KQ2Y | Y-branch | 4, 6, 8, 10 |
| KQ2U | Union straight | 4, 6, 8, 10, 12 |
| KQ2W | Union elbow | 4, 6, 8, 10 |
| Series | Material | Max Pressure (MPa) | Temp Range |
|---|---|---|---|
| TU | Polyurethane | 1.0 | -5 to 60°C |
| TS | Nylon | 1.0 | -20 to 60°C |
| TRS | Rubber | 0.5 | -20 to 80°C |
| TL | Fluoropolymer (PTFE) | 0.5 | -60 to 200°C |
KQ2 for fast, reliable pneumatic circuit assembly.
Fluoropolymer tubing for corrosive media.
TL/TH PTFE tubing for ovens and hot processes.
AN/ASN series exhaust silencers for noise reduction. ZFC exhaust cleaner removes oil mist from exhaust. Pressure gauges G46/G36 with 360° swivel mount, color zone indicators for instant visual check.
| Series | Port | Flow (L/min) | Noise Reduction |
|---|---|---|---|
| AN100 | M5 | 100 | ~25 dB(A) |
| AN200 | 1/8 | 300 | ~25 dB(A) |
| AN300 | 1/4 | 700 | ~25 dB(A) |
| AN400 | 3/8 | 1300 | ~25 dB(A) |
| AN600 | 3/4 | 3500 | ~25 dB(A) |
| Model | Scale | Gauge OD | Port |
|---|---|---|---|
| G46-2 | 0–0.2 MPa | Ø42 mm | R1/8 |
| G46-4 | 0–0.4 MPa | Ø42 mm | R1/8 |
| G46-10 | 0–1.0 MPa | Ø42 mm | R1/8 |
AN silencers on valve exhausts to meet plant noise limits.
Color-zone gauges for quick operator pressure status checks.
ZFC oil-mist cleaner for food and clean-room environments.
AFF main-line filters, AM mist separators, AMD micro-mist separators (0.01 μm), AMK activated carbon odor filter — full line of compressed air treatment from 5 μm down to sub-micron. Suitable for food, pharmaceutical and semiconductor applications.
| Series | Filtration | Flow (L/min) | Port | Application |
|---|---|---|---|---|
| AFF | 5 μm | Up to 10,000 | 1/2–2 | Main line |
| AM | 0.3 μm | Up to 4,000 | 1/8–1 | Mist removal |
| AMD | 0.01 μm | Up to 2,000 | 1/8–3/4 | Oil-free air |
| AMK | Activated carbon | Up to 2,000 | 1/8–3/4 | Odor / vapor |
AMD sub-micron filters for PCB and semiconductor lines.
Oil-free clean air for blister pack and tablet lines.
AMK carbon filter for odor-free product contact air.
AM mist separators prevent oil contamination in finishes.
D-A series reed auto switches (IP67, 24 VDC) for cylinder piston position detection, and ZSE10 / ISE30A / ISE40A digital pressure switches with 4-digit LED display, NPN/PNP output and 2.5 ms response time.
Reed switches detect the position of the cylinder piston via a built-in permanent magnet. Mechanical contacts operate on AC or DC. Two-colour indication available for optimum positioning confirmation.
| Parameter | D-A93 Specification |
|---|---|
| Series | D-A90 / D-A93 / D-A96 |
| Switch Type | Reed (2-wire mechanical) |
| Switch Action | SPST-NO (Normally Open) |
| Rated Voltage | 24 VDC / 100 VAC |
| Current (24 VDC) | 5 – 40 mA |
| Current (100 VAC) | 5 – 20 mA |
| Indicator Light | Red LED (1-colour) |
| Lead Wire Length | 0.5 m / 1 m / 3 m options |
| Electrical Entry | In-line (axial) |
| Protection Class | IP67 |
| Repeatability | ≤0.13 mm (0.005") |
| Mounting Method | Band or rail, direct cylinder mount |
| Operating Principle | Piston-mounted permanent magnet closes reed contacts |
Compact digital pressure switches with 4-digit LED display, dual output, and selectable anti-chattering response time. ZSE10 is 50% lower height than previous models.
| Parameter | ZSE10 | ISE30A | ISE40A |
|---|---|---|---|
| Fluid | Vacuum / compound | Positive pressure | Positive pressure |
| Detection Range | –100 to 0 kPa (or –100 to +100 kPa compound) | –100 to 1,000 kPa | –100 to 1,000 kPa |
| Display | 4-digit LED | 4-digit LED | 4-digit LED |
| Outputs | NPN / PNP, 2 outputs | NPN / PNP, 2 outputs | NPN / PNP, 2 outputs |
| Supply Voltage | 12 – 24 VDC | 12 – 24 VDC | 12 – 24 VDC |
| Response Time | 2.5 ms | 2.5 ms | 2.5 ms |
| Anti-chattering | 20–2,000 ms (selectable) | 20–2,000 ms | 20–2,000 ms |
| Pressure Connection | M5, R1/8 | M5, R1/8 | R1/8 |
| Protection (sensor) | IP40 (body) | IP40 | IP67 (sensor section) |
| Copy Setting | Up to 10 units | Up to 10 units | Up to 10 units |
| Mounting | Direct / Panel / DIN rail | Direct / Panel / DIN rail | Direct / Panel / DIN rail |
Sensors and switches provide reliable position and pressure feedback for safe, efficient closed-loop automation control.
Reed switches confirm extend and retract positions in every PLC-controlled machine.
ZSE10 digital switches verify workpiece pick-up before robot movement begins.
ISE30A/40A for real-time line pressure monitoring and alarm output.
Pressure drop detection using digital switches to flag seal failure or piping leaks.
Aximotion Factory Solutions supplies the full SMC, FESTO & CKD pneumatic range across Pune and Maharashtra. Get a quote or technical support from our engineering team today.